atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3 vgapci0: Boot video device hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 2c:f0:5d:56:28:69 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2 pci7: <ACPI PCI bus> on pcib7 pci7: <network, ethernet> at device 0.0 (no driver attached) pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci8: <ACPI PCI bus> on pcib8 pci8: <unknown> at device 0.0 (no driver attached) pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <unknown> at device 0.0 (no driver attached) pci9: <encrypt/decrypt> at device 0.1 (no driver attached) xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9 xhci1: 64 bytes context size, 64-bit DMA usbus1: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 cpu0: <ACPI CPU> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 CAM usbus1 ugen1.1: <0x1022 XHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device ada0: Serial Number Z1D5KJVK ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device ada1: Serial Number WD-WMASY0856299 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 610480MB (1250263728 512 byte sectors) ada2 at ahcich5 bus 0 scbus5 target 0 lun 0 ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device ada2: Serial Number 1811AD803646 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada2: Command Queueing enabled ada2: 476940MB (976773168 512 byte sectors) GEOM_ELI: Device ada2p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: accelerated software uhub0: 8 ports with 8 removable, self powered uhub1: 14 ports with 14 removable, self powered ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 ukbd0 on uhub0 ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 kbd2 at ukbd0 Root mount waiting for: usbus0 ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 Root mount waiting for: usbus0 uhub2: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 Root mount waiting for: usbus0 ugen0.4: <MSI MYSTIC LIGHT> at usbus0 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) driver bug: Unable to set devclass (class: ppc devname: (unknown)) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: cannot find EC device acpi_wmi2: Embedded MOF found ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [drm] amdgpu kernel modesetting enabled. drmn0: <drmn> on vgapci0 VT: Replacing driver "efifb" with new "dummy". vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF). [drm] register mmio base: 0xFCB00000 [drm] register mmio size: 262144 [drm] add ip block number 0 <vi_common> [drm] add ip block number 1 <gmc_v8_0> [drm] add ip block number 2 <tonga_ih> [drm] add ip block number 3 <gfx_v8_0> [drm] add ip block number 4 <sdma_v3_0> [drm] add ip block number 5 <powerplay> [drm] add ip block number 6 <dm> [drm] add ip block number 7 <uvd_v6_0> [drm] add ip block number 8 <vce_v3_0> ATOM BIOS: 113-57045EHB2-W90 [drm] UVD is enabled in VM mode [drm] UVD ENC is enabled in VM mode [drm] VCE enabled in VM mode [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [drm] Detected VRAM RAM=4096M, BAR=256M [drm] RAM width 256bits GDDR5 [TTM] Zone kernel: Available graphics memory: 16730076 KiB [TTM] Zone dma32: Available graphics memory: 2097152 KiB [TTM] Initializing pool allocator [drm] amdgpu: 4096M of VRAM memory ready [drm] amdgpu: 4096M of GTT memory ready. [drm] GART: num cpu pages 65536, num gpu pages 65536 [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [drm] Chained IB support enabled! drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [drm] Found UVD firmware Version: 1.130 Family ID: 16 drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [drm] Found VCE firmware Version: 53.26 Binary ID: 3 drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [drm] DM_PPLIB: values for Engine clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 588000 [drm] DM_PPLIB: 952000 [drm] DM_PPLIB: 1076000 [drm] DM_PPLIB: 1143000 [drm] DM_PPLIB: 1208000 [drm] DM_PPLIB: 1250000 [drm] DM_PPLIB: 1286000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] DM_PPLIB: values for Memory clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 1000000 [drm] DM_PPLIB: 1750000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] Display Core initialized with v3.2.48! [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode [drm] Connector DP-3: get mode from tunables: [drm] - kern.vt.fb.modes.DP-3 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-D-1: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-D-1 [drm] - kern.vt.fb.default_mode [drm] SADs count is: -2, don't need to read it [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] UVD and UVD ENC initialized successfully. [drm] VCE initialized successfully. [drm] fb mappable at 0xD0830000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "dummy" with new "fb". start FB_INFO: type=11 height=1080 width=1920 depth=32 cmsize=16 size=8294400 pbase=0xd0830000 vbase=0xfffff800d0830000 name=drmn0 flags=0x0 stride=7680 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: amdgpudrmfb frame buffer device [drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP uhid0 on uhub0 uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 uhid1 on uhub1 uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0 on uhub1 ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 Security policy loaded: MAC/ntpd (mac_ntpd) pid 67926 (conftest), jid 0, uid 0: exited on signal 11 (core dumped) pid 58848 (conftest), jid 0, uid 0: exited on signal 11 (core dumped) pid 1684 (BitchX-1.2.1), jid 0, uid 1001: exited on signal 11 (core dumped) pid 47705 (conftest), jid 0, uid 0: exited on signal 11 (core dumped) Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done All buffers synced. ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022 [email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(efifb): resolution 1024x768 CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.08-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> Structured Extended Features2=0x400004<UMIP,RDPID> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33309016064 (31765 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 10 11 12 15 8 13 1 3 7 4 9 14 5 6 2 Timecounter "TSC-low" frequency 2100040530 Hz quality 1000 KTLS: Initialized 16 threads random: entropy device external interface [ath_hal] loaded WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd1 at kbdmux0 000.000067 [4347] netmap_init netmap: loaded module mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) nexus0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3 vgapci0: Boot video device hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 2c:f0:5d:56:28:69 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2 pci7: <ACPI PCI bus> on pcib7 pci7: <network, ethernet> at device 0.0 (no driver attached) pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci8: <ACPI PCI bus> on pcib8 pci8: <unknown> at device 0.0 (no driver attached) pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <unknown> at device 0.0 (no driver attached) pci9: <encrypt/decrypt> at device 0.1 (no driver attached) xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9 xhci1: 64 bytes context size, 64-bit DMA usbus1: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 cpu0: <ACPI CPU> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 CAM usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 ugen1.1: <0x1022 XHCI root HUB> at usbus1 uhub0 on usbus0 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1 on usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device ada0: Serial Number Z1D5KJVK ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device ada1: Serial Number WD-WMASY0856299 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 610480MB (1250263728 512 byte sectors) ada2 at ahcich5 bus 0 scbus5 target 0 lun 0 ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device ada2: Serial Number 1811AD803646 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada2: Command Queueing enabled ada2: 476940MB (976773168 512 byte sectors) uhub1: 8 ports with 8 removable, self powered GEOM_ELI: Device ada2p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: accelerated software uhub0: 14 ports with 14 removable, self powered ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 ukbd0 on uhub1 ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 kbd2 at ukbd0 Root mount waiting for: usbus0 ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 Root mount waiting for: usbus0 ugen0.4: <MSI MYSTIC LIGHT> at usbus0 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) driver bug: Unable to set devclass (class: ppc devname: (unknown)) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: cannot find EC device acpi_wmi2: Embedded MOF found ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [drm] amdgpu kernel modesetting enabled. drmn0: <drmn> on vgapci0 VT: Replacing driver "efifb" with new "dummy". vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF). [drm] register mmio base: 0xFCB00000 [drm] register mmio size: 262144 [drm] add ip block number 0 <vi_common> [drm] add ip block number 1 <gmc_v8_0> [drm] add ip block number 2 <tonga_ih> [drm] add ip block number 3 <gfx_v8_0> [drm] add ip block number 4 <sdma_v3_0> [drm] add ip block number 5 <powerplay> [drm] add ip block number 6 <dm> [drm] add ip block number 7 <uvd_v6_0> [drm] add ip block number 8 <vce_v3_0> ATOM BIOS: 113-57045EHB2-W90 [drm] UVD is enabled in VM mode [drm] UVD ENC is enabled in VM mode [drm] VCE enabled in VM mode [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [drm] Detected VRAM RAM=4096M, BAR=256M [drm] RAM width 256bits GDDR5 [TTM] Zone kernel: Available graphics memory: 16730076 KiB [TTM] Zone dma32: Available graphics memory: 2097152 KiB [TTM] Initializing pool allocator [drm] amdgpu: 4096M of VRAM memory ready [drm] amdgpu: 4096M of GTT memory ready. [drm] GART: num cpu pages 65536, num gpu pages 65536 [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [drm] Chained IB support enabled! drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [drm] Found UVD firmware Version: 1.130 Family ID: 16 drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [drm] Found VCE firmware Version: 53.26 Binary ID: 3 drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [drm] DM_PPLIB: values for Engine clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 588000 [drm] DM_PPLIB: 952000 [drm] DM_PPLIB: 1076000 [drm] DM_PPLIB: 1143000 [drm] DM_PPLIB: 1208000 [drm] DM_PPLIB: 1250000 [drm] DM_PPLIB: 1286000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] DM_PPLIB: values for Memory clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 1000000 [drm] DM_PPLIB: 1750000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] Display Core initialized with v3.2.48! [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode [drm] Connector DP-3: get mode from tunables: [drm] - kern.vt.fb.modes.DP-3 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-D-1: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-D-1 [drm] - kern.vt.fb.default_mode [drm] SADs count is: -2, don't need to read it [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] UVD and UVD ENC initialized successfully. [drm] VCE initialized successfully. [drm] fb mappable at 0xD0830000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "dummy" with new "fb". start FB_INFO: type=11 height=1080 width=1920 depth=32 cmsize=16 size=8294400 pbase=0xd0830000 vbase=0xfffff800d0830000 name=drmn0 flags=0x0 stride=7680 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: amdgpudrmfb frame buffer device [drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP uhid0 on uhub1 uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 uhid1 on uhub0 uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0 on uhub0 ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 Security policy loaded: MAC/ntpd (mac_ntpd) uhub1: at usbus1, port 1, addr 1 (disconnected) ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected) ukbd0: at uhub1, port 1, addr 1 (disconnected) ukbd0: detached uhid0: at uhub1, port 1, addr 1 (disconnected) uhid0: detached uhub1: detached re0: link state changed to DOWN re0: link state changed to UP vgapci0: child drmn0 requested pci_set_powerstate uhub0: at usbus0, port 1, addr 1 (disconnected) ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected) uhub2: at uhub0, port 6, addr 1 (disconnected) uhub2: detached ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected) ums0: at uhub0, port 9, addr 2 (disconnected) ums0: detached ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected) uhid1: at uhub0, port 12, addr 3 (disconnected) uhid1: detached uhub0: detached acpi0: cleared fixed power button status ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022 [email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(efifb): resolution 1024x768 CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.08-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> Structured Extended Features2=0x400004<UMIP,RDPID> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33309016064 (31765 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 11 10 14 8 13 15 1 2 4 6 12 9 7 5 3 Timecounter "TSC-low" frequency 2100041286 Hz quality 1000 KTLS: Initialized 16 threads random: entropy device external interface [ath_hal] loaded WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd1 at kbdmux0 000.000067 [4347] netmap_init netmap: loaded module mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) nexus0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3 vgapci0: Boot video device hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 2c:f0:5d:56:28:69 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2 pci7: <ACPI PCI bus> on pcib7 pci7: <network, ethernet> at device 0.0 (no driver attached) pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci8: <ACPI PCI bus> on pcib8 pci8: <unknown> at device 0.0 (no driver attached) pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <unknown> at device 0.0 (no driver attached) pci9: <encrypt/decrypt> at device 0.1 (no driver attached) xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9 xhci1: 64 bytes context size, 64-bit DMA usbus1: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 cpu0: <ACPI CPU> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 CAM usbus1 ugen1.1: <0x1022 XHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device ada0: Serial Number Z1D5KJVK ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device ada1: Serial Number WD-WMASY0856299 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 610480MB (1250263728 512 byte sectors) ada2 at ahcich5 bus 0 scbus5 target 0 lun 0 ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device ada2: Serial Number 1811AD803646 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada2: Command Queueing enabled ada2: 476940MB (976773168 512 byte sectors) GEOM_ELI: Device ada2p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: accelerated software uhub0: 8 ports with 8 removable, self powered uhub1: 14 ports with 14 removable, self powered ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 ukbd0 on uhub0 ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 kbd2 at ukbd0 Root mount waiting for: usbus0 ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 Root mount waiting for: usbus0 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 ugen0.4: <MSI MYSTIC LIGHT> at usbus0 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) driver bug: Unable to set devclass (class: ppc devname: (unknown)) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: cannot find EC device acpi_wmi2: Embedded MOF found ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [drm] amdgpu kernel modesetting enabled. drmn0: <drmn> on vgapci0 VT: Replacing driver "efifb" with new "dummy". vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF). [drm] register mmio base: 0xFCB00000 [drm] register mmio size: 262144 [drm] add ip block number 0 <vi_common> [drm] add ip block number 1 <gmc_v8_0> [drm] add ip block number 2 <tonga_ih> [drm] add ip block number 3 <gfx_v8_0> [drm] add ip block number 4 <sdma_v3_0> [drm] add ip block number 5 <powerplay> [drm] add ip block number 6 <dm> [drm] add ip block number 7 <uvd_v6_0> [drm] add ip block number 8 <vce_v3_0> ATOM BIOS: 113-57045EHB2-W90 [drm] UVD is enabled in VM mode [drm] UVD ENC is enabled in VM mode [drm] VCE enabled in VM mode [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [drm] Detected VRAM RAM=4096M, BAR=256M [drm] RAM width 256bits GDDR5 [TTM] Zone kernel: Available graphics memory: 16730076 KiB [TTM] Zone dma32: Available graphics memory: 2097152 KiB [TTM] Initializing pool allocator [drm] amdgpu: 4096M of VRAM memory ready [drm] amdgpu: 4096M of GTT memory ready. [drm] GART: num cpu pages 65536, num gpu pages 65536 [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [drm] Chained IB support enabled! drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [drm] Found UVD firmware Version: 1.130 Family ID: 16 drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [drm] Found VCE firmware Version: 53.26 Binary ID: 3 drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [drm] DM_PPLIB: values for Engine clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 588000 [drm] DM_PPLIB: 952000 [drm] DM_PPLIB: 1076000 [drm] DM_PPLIB: 1143000 [drm] DM_PPLIB: 1208000 [drm] DM_PPLIB: 1250000 [drm] DM_PPLIB: 1286000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] DM_PPLIB: values for Memory clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 1000000 [drm] DM_PPLIB: 1750000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] Display Core initialized with v3.2.48! [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode [drm] Connector DP-3: get mode from tunables: [drm] - kern.vt.fb.modes.DP-3 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-D-1: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-D-1 [drm] - kern.vt.fb.default_mode [drm] SADs count is: -2, don't need to read it [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] UVD and UVD ENC initialized successfully. [drm] VCE initialized successfully. [drm] fb mappable at 0xD0830000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "dummy" with new "fb". start FB_INFO: type=11 height=1080 width=1920 depth=32 cmsize=16 size=8294400 pbase=0xd0830000 vbase=0xfffff800d0830000 name=drmn0 flags=0x0 stride=7680 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: amdgpudrmfb frame buffer device [drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP uhid0 on uhub0 uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 uhid1 on uhub1 uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0 on uhub1 ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 Security policy loaded: MAC/ntpd (mac_ntpd) uhub0: at usbus1, port 1, addr 1 (disconnected) ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected) ukbd0: at uhub0, port 1, addr 1 (disconnected) ukbd0: detached uhid0: at uhub0, port 1, addr 1 (disconnected) uhid0: detached uhub0: detached re0: link state changed to DOWN re0: link state changed to UP vgapci0: child drmn0 requested pci_set_powerstate uhub1: at usbus0, port 1, addr 1 (disconnected) ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected) uhub2: at uhub1, port 6, addr 1 (disconnected) uhub2: detached ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected) ums0: at uhub1, port 9, addr 2 (disconnected) ums0: detached ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected) uhid1: at uhub1, port 12, addr 3 (disconnected) uhid1: detached uhub1: detached acpi0: cleared fixed power button status ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022 [email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(efifb): resolution 1024x768 CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.09-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> Structured Extended Features2=0x400004<UMIP,RDPID> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33309020160 (31765 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 11 10 14 12 8 15 1 6 5 3 13 9 4 2 7 Timecounter "TSC-low" frequency 2100045675 Hz quality 1000 KTLS: Initialized 16 threads random: entropy device external interface [ath_hal] loaded WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd1 at kbdmux0 000.000067 [4347] netmap_init netmap: loaded module mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) nexus0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3 vgapci0: Boot video device hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 2c:f0:5d:56:28:69 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2 pci7: <ACPI PCI bus> on pcib7 pci7: <network, ethernet> at device 0.0 (no driver attached) pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci8: <ACPI PCI bus> on pcib8 pci8: <unknown> at device 0.0 (no driver attached) pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <unknown> at device 0.0 (no driver attached) pci9: <encrypt/decrypt> at device 0.1 (no driver attached) xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9 xhci1: 64 bytes context size, 64-bit DMA usbus1: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 cpu0: <ACPI CPU> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 CAM usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <0x1022 XHCI root HUB> at usbus1 uhub1 on usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device ada0: Serial Number Z1D5KJVK ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device ada1: Serial Number WD-WMASY0856299 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 610480MB (1250263728 512 byte sectors) ada2 at ahcich5 bus 0 scbus5 target 0 lun 0 ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device ada2: Serial Number 1811AD803646 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada2: Command Queueing enabled ada2: 476940MB (976773168 512 byte sectors) uhub1: 8 ports with 8 removable, self powered GEOM_ELI: Device ada2p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: accelerated software uhub0: 14 ports with 14 removable, self powered ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 ukbd0 on uhub1 ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 kbd2 at ukbd0 Root mount waiting for: usbus0 ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 Root mount waiting for: usbus0 uhub2: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 Root mount waiting for: usbus0 ugen0.4: <MSI MYSTIC LIGHT> at usbus0 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) driver bug: Unable to set devclass (class: ppc devname: (unknown)) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: cannot find EC device acpi_wmi2: Embedded MOF found ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [drm] amdgpu kernel modesetting enabled. drmn0: <drmn> on vgapci0 VT: Replacing driver "efifb" with new "dummy". vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF). [drm] register mmio base: 0xFCB00000 [drm] register mmio size: 262144 [drm] add ip block number 0 <vi_common> [drm] add ip block number 1 <gmc_v8_0> [drm] add ip block number 2 <tonga_ih> [drm] add ip block number 3 <gfx_v8_0> [drm] add ip block number 4 <sdma_v3_0> [drm] add ip block number 5 <powerplay> [drm] add ip block number 6 <dm> [drm] add ip block number 7 <uvd_v6_0> [drm] add ip block number 8 <vce_v3_0> ATOM BIOS: 113-57045EHB2-W90 [drm] UVD is enabled in VM mode [drm] UVD ENC is enabled in VM mode [drm] VCE enabled in VM mode [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [drm] Detected VRAM RAM=4096M, BAR=256M [drm] RAM width 256bits GDDR5 [TTM] Zone kernel: Available graphics memory: 16730076 KiB [TTM] Zone dma32: Available graphics memory: 2097152 KiB [TTM] Initializing pool allocator [drm] amdgpu: 4096M of VRAM memory ready [drm] amdgpu: 4096M of GTT memory ready. [drm] GART: num cpu pages 65536, num gpu pages 65536 [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [drm] Chained IB support enabled! drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [drm] Found UVD firmware Version: 1.130 Family ID: 16 drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [drm] Found VCE firmware Version: 53.26 Binary ID: 3 drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [drm] DM_PPLIB: values for Engine clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 588000 [drm] DM_PPLIB: 952000 [drm] DM_PPLIB: 1076000 [drm] DM_PPLIB: 1143000 [drm] DM_PPLIB: 1208000 [drm] DM_PPLIB: 1250000 [drm] DM_PPLIB: 1286000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] DM_PPLIB: values for Memory clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 1000000 [drm] DM_PPLIB: 1750000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] Display Core initialized with v3.2.48! [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode [drm] Connector DP-3: get mode from tunables: [drm] - kern.vt.fb.modes.DP-3 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-D-1: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-D-1 [drm] - kern.vt.fb.default_mode [drm] SADs count is: -2, don't need to read it [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] UVD and UVD ENC initialized successfully. [drm] VCE initialized successfully. [drm] fb mappable at 0xD0830000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "dummy" with new "fb". start FB_INFO: type=11 height=1080 width=1920 depth=32 cmsize=16 size=8294400 pbase=0xd0830000 vbase=0xfffff800d0830000 name=drmn0 flags=0x0 stride=7680 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: amdgpudrmfb frame buffer device [drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP uhid0 on uhub1 uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 uhid1 on uhub0 uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0 on uhub0 ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 Security policy loaded: MAC/ntpd (mac_ntpd) uhub1: at usbus1, port 1, addr 1 (disconnected) ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected) ukbd0: at uhub1, port 1, addr 1 (disconnected) ukbd0: detached uhid0: at uhub1, port 1, addr 1 (disconnected) uhid0: detached uhub1: detached re0: link state changed to DOWN re0: link state changed to UP vgapci0: child drmn0 requested pci_set_powerstate uhub0: at usbus0, port 1, addr 1 (disconnected) ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected) uhub2: at uhub0, port 6, addr 1 (disconnected) uhub2: detached ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected) ums0: at uhub0, port 9, addr 2 (disconnected) ums0: detached ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected) uhid1: at uhub0, port 12, addr 3 (disconnected) uhid1: detached uhub0: detached acpi0: cleared fixed power button status ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022 [email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(efifb): resolution 1024x768 CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.09-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> Structured Extended Features2=0x400004<UMIP,RDPID> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33309016064 (31765 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 12 13 14 9 11 15 1 2 5 6 8 10 7 4 3 Timecounter "TSC-low" frequency 2100043470 Hz quality 1000 KTLS: Initialized 16 threads random: entropy device external interface [ath_hal] loaded WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd1 at kbdmux0 000.000067 [4347] netmap_init netmap: loaded module mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020) nexus0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3 vgapci0: Boot video device hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 2c:f0:5d:56:28:69 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2 pci7: <ACPI PCI bus> on pcib7 pci7: <network, ethernet> at device 0.0 (no driver attached) pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci8: <ACPI PCI bus> on pcib8 pci8: <unknown> at device 0.0 (no driver attached) pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <unknown> at device 0.0 (no driver attached) pci9: <encrypt/decrypt> at device 0.1 (no driver attached) xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9 xhci1: 64 bytes context size, 64-bit DMA usbus1: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 cpu0: <ACPI CPU> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1 pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1 pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1 pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 CAM usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <0x1022 XHCI root HUB> at usbus1 uhub1 on usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device ada0: Serial Number Z1D5KJVK ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device ada1: Serial Number WD-WMASY0856299 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 610480MB (1250263728 512 byte sectors) ada2 at ahcich5 bus 0 scbus5 target 0 lun 0 ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device ada2: Serial Number 1811AD803646 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada2: Command Queueing enabled ada2: 476940MB (976773168 512 byte sectors) GEOM_ELI: Device ada2p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: accelerated software uhub1: 8 ports with 8 removable, self powered uhub0: 14 ports with 14 removable, self powered ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 ukbd0 on uhub1 ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 kbd2 at ukbd0 Root mount waiting for: usbus0 ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0 Root mount waiting for: usbus0 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 ugen0.4: <MSI MYSTIC LIGHT> at usbus0 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) driver bug: Unable to set devclass (class: ppc devname: (unknown)) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: cannot find EC device acpi_wmi2: Embedded MOF found ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) [drm] amdgpu kernel modesetting enabled. drmn0: <drmn> on vgapci0 VT: Replacing driver "efifb" with new "dummy". vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF). [drm] register mmio base: 0xFCB00000 [drm] register mmio size: 262144 [drm] add ip block number 0 <vi_common> [drm] add ip block number 1 <gmc_v8_0> [drm] add ip block number 2 <tonga_ih> [drm] add ip block number 3 <gfx_v8_0> [drm] add ip block number 4 <sdma_v3_0> [drm] add ip block number 5 <powerplay> [drm] add ip block number 6 <dm> [drm] add ip block number 7 <uvd_v6_0> [drm] add ip block number 8 <vce_v3_0> ATOM BIOS: 113-57045EHB2-W90 [drm] UVD is enabled in VM mode [drm] UVD ENC is enabled in VM mode [drm] VCE enabled in VM mode [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin' drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0; [drm] Detected VRAM RAM=4096M, BAR=256M [drm] RAM width 256bits GDDR5 [TTM] Zone kernel: Available graphics memory: 16730076 KiB [TTM] Zone dma32: Available graphics memory: 2097152 KiB [TTM] Initializing pool allocator [drm] amdgpu: 4096M of VRAM memory ready [drm] amdgpu: 4096M of GTT memory ready. [drm] GART: num cpu pages 65536, num gpu pages 65536 [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin' [drm] Chained IB support enabled! drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin' drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin' amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin' [drm] Found UVD firmware Version: 1.130 Family ID: 16 drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin' [drm] Found VCE firmware Version: 53.26 Binary ID: 3 drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin' [drm] DM_PPLIB: values for Engine clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 588000 [drm] DM_PPLIB: 952000 [drm] DM_PPLIB: 1076000 [drm] DM_PPLIB: 1143000 [drm] DM_PPLIB: 1208000 [drm] DM_PPLIB: 1250000 [drm] DM_PPLIB: 1286000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] DM_PPLIB: values for Memory clock [drm] DM_PPLIB: 300000 [drm] DM_PPLIB: 1000000 [drm] DM_PPLIB: 1750000 [drm] DM_PPLIB: Validation clocks: [drm] DM_PPLIB: engine_max_clock: 128600 [drm] DM_PPLIB: memory_max_clock: 175000 [drm] DM_PPLIB: level : 8 [drm] Display Core initialized with v3.2.48! [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode [drm] Connector DP-3: get mode from tunables: [drm] - kern.vt.fb.modes.DP-3 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-D-1: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-D-1 [drm] - kern.vt.fb.default_mode [drm] SADs count is: -2, don't need to read it [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] UVD and UVD ENC initialized successfully. [drm] VCE initialized successfully. [drm] fb mappable at 0xD0830000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "dummy" with new "fb". start FB_INFO: type=11 height=1080 width=1920 depth=32 cmsize=16 size=8294400 pbase=0xd0830000 vbase=0xfffff800d0830000 name=drmn0 flags=0x0 stride=7680 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: amdgpudrmfb frame buffer device [drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP uhid0 on uhub1 uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1 uhid1 on uhub0 uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0 on uhub0 ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 Security policy loaded: MAC/ntpd (mac_ntpd)