atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub0: 8 ports with 8 removable, self powered
uhub1: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub0
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
Root mount waiting for: usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub0
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub1
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub1
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
pid 67926 (conftest), jid 0, uid 0: exited on signal 11 (core dumped)
pid 58848 (conftest), jid 0, uid 0: exited on signal 11 (core dumped)
pid 1684 (BitchX-1.2.1), jid 0, uid 1001: exited on signal 11 (core dumped)
pid 47705 (conftest), jid 0, uid 0: exited on signal 11 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
All buffers synced.
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.08-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33309016064 (31765 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 10 11 12 15 8 13 1 3 7 4 9 14 5 6 2
Timecounter "TSC-low" frequency 2100040530 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000067 [4347] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
uhub1: 8 ports with 8 removable, self powered
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub0: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
Root mount waiting for: usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub1
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub0
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub0
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
uhub1: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected)
ukbd0: at uhub1, port 1, addr 1 (disconnected)
ukbd0: detached
uhid0: at uhub1, port 1, addr 1 (disconnected)
uhid0: detached
uhub1: detached
re0: link state changed to DOWN
re0: link state changed to UP
vgapci0: child drmn0 requested pci_set_powerstate
uhub0: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 6, addr 1 (disconnected)
uhub2: detached
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected)
ums0: at uhub0, port 9, addr 2 (disconnected)
ums0: detached
ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected)
uhid1: at uhub0, port 12, addr 3 (disconnected)
uhid1: detached
uhub0: detached
acpi0: cleared fixed power button status
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.08-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33309016064 (31765 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 11 10 14 8 13 15 1 2 4 6 12 9 7 5 3
Timecounter "TSC-low" frequency 2100041286 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000067 [4347] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub0: 8 ports with 8 removable, self powered
uhub1: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub0
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub0
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub1
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub1
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
uhub0: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected)
ukbd0: at uhub0, port 1, addr 1 (disconnected)
ukbd0: detached
uhid0: at uhub0, port 1, addr 1 (disconnected)
uhid0: detached
uhub0: detached
re0: link state changed to DOWN
re0: link state changed to UP
vgapci0: child drmn0 requested pci_set_powerstate
uhub1: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 6, addr 1 (disconnected)
uhub2: detached
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected)
ums0: at uhub1, port 9, addr 2 (disconnected)
ums0: detached
ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected)
uhid1: at uhub1, port 12, addr 3 (disconnected)
uhid1: detached
uhub1: detached
acpi0: cleared fixed power button status
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.09-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33309020160 (31765 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 11 10 14 12 8 15 1 6 5 3 13 9 4 2 7
Timecounter "TSC-low" frequency 2100045675 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000067 [4347] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
uhub1: 8 ports with 8 removable, self powered
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub0: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
Root mount waiting for: usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub1
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub0
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub0
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
uhub1: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected)
ukbd0: at uhub1, port 1, addr 1 (disconnected)
ukbd0: detached
uhid0: at uhub1, port 1, addr 1 (disconnected)
uhid0: detached
uhub1: detached
re0: link state changed to DOWN
re0: link state changed to UP
vgapci0: child drmn0 requested pci_set_powerstate
uhub0: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 6, addr 1 (disconnected)
uhub2: detached
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected)
ums0: at uhub0, port 9, addr 2 (disconnected)
ums0: detached
ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected)
uhid1: at uhub0, port 12, addr 3 (disconnected)
uhid1: detached
uhub0: detached
acpi0: cleared fixed power button status
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.09-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33309016064 (31765 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 12 13 14 9 11 15 1 2 5 6 8 10 7 4 3
Timecounter "TSC-low" frequency 2100043470 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000067 [4347] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub1: 8 ports with 8 removable, self powered
uhub0: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub1
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub0
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub0
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub0: 8 ports with 8 removable, self powered
uhub1: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub0
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
Root mount waiting for: usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub0
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub1
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub1
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
pid 67926 (conftest), jid 0, uid 0: exited on signal 11 (core dumped)
pid 58848 (conftest), jid 0, uid 0: exited on signal 11 (core dumped)
pid 1684 (BitchX-1.2.1), jid 0, uid 1001: exited on signal 11 (core dumped)
pid 47705 (conftest), jid 0, uid 0: exited on signal 11 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
All buffers synced.
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.08-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33309016064 (31765 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 10 11 12 15 8 13 1 3 7 4 9 14 5 6 2
Timecounter "TSC-low" frequency 2100040530 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000067 [4347] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
uhub1: 8 ports with 8 removable, self powered
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub0: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
Root mount waiting for: usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub1
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub0
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub0
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
uhub1: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected)
ukbd0: at uhub1, port 1, addr 1 (disconnected)
ukbd0: detached
uhid0: at uhub1, port 1, addr 1 (disconnected)
uhid0: detached
uhub1: detached
re0: link state changed to DOWN
re0: link state changed to UP
vgapci0: child drmn0 requested pci_set_powerstate
uhub0: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 6, addr 1 (disconnected)
uhub2: detached
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected)
ums0: at uhub0, port 9, addr 2 (disconnected)
ums0: detached
ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected)
uhid1: at uhub0, port 12, addr 3 (disconnected)
uhid1: detached
uhub0: detached
acpi0: cleared fixed power button status
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.08-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33309016064 (31765 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 11 10 14 8 13 15 1 2 4 6 12 9 7 5 3
Timecounter "TSC-low" frequency 2100041286 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000067 [4347] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub0: 8 ports with 8 removable, self powered
uhub1: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub0
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub0
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub1
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub1
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
uhub0: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected)
ukbd0: at uhub0, port 1, addr 1 (disconnected)
ukbd0: detached
uhid0: at uhub0, port 1, addr 1 (disconnected)
uhid0: detached
uhub0: detached
re0: link state changed to DOWN
re0: link state changed to UP
vgapci0: child drmn0 requested pci_set_powerstate
uhub1: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 6, addr 1 (disconnected)
uhub2: detached
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected)
ums0: at uhub1, port 9, addr 2 (disconnected)
ums0: detached
ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected)
uhid1: at uhub1, port 12, addr 3 (disconnected)
uhid1: detached
uhub1: detached
acpi0: cleared fixed power button status
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.09-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33309020160 (31765 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 11 10 14 12 8 15 1 6 5 3 13 9 4 2 7
Timecounter "TSC-low" frequency 2100045675 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000067 [4347] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
uhub1: 8 ports with 8 removable, self powered
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub0: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
Root mount waiting for: usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub1
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub0
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub0
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
uhub1: at usbus1, port 1, addr 1 (disconnected)
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1 (disconnected)
ukbd0: at uhub1, port 1, addr 1 (disconnected)
ukbd0: detached
uhid0: at uhub1, port 1, addr 1 (disconnected)
uhid0: detached
uhub1: detached
re0: link state changed to DOWN
re0: link state changed to UP
vgapci0: child drmn0 requested pci_set_powerstate
uhub0: at usbus0, port 1, addr 1 (disconnected)
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 6, addr 1 (disconnected)
uhub2: detached
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0 (disconnected)
ums0: at uhub0, port 9, addr 2 (disconnected)
ums0: detached
ugen0.4: <MSI MYSTIC LIGHT> at usbus0 (disconnected)
uhid1: at uhub0, port 12, addr 3 (disconnected)
uhid1: detached
uhub0: detached
acpi0: cleared fixed power button status
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p11 #0: Tue Apr 5 18:54:35 UTC 2022
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([email protected]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 7 3700X 8-Core Processor (4200.09-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33309016064 (31765 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 12 13 14 9 11 15 1 2 5 6 8 10 7 4 3
Timecounter "TSC-low" frequency 2100043470 Hz quality 1000
KTLS: Initialized 16 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000067 [4347] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcca0000-0xfcca7fff irq 28 at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcc80000-0xfcc9ffff irq 29 at device 0.1 on pci1
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 30 at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfcb00000-0xfcb3ffff irq 28 at device 0.0 on pci3
vgapci0: Boot video device
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcb60000-0xfcb63fff irq 29 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 30 at device 6.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 31 at device 7.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfca04000-0xfca04fff,0xfca00000-0xfca03fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d:56:28:69
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <unknown> at device 0.0 (no driver attached)
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcd00000-0xfcdfffff irq 39 at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcf00000-0xfcf07fff irq 36 at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALCS1200A (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa1
pcm7: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa1
pcm8: <Realtek ALCS1200A (Rear Digital)> at nid 30 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1D5KJVK
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD6400AAKS-65A7B0 01.03B01> ATA8-ACS SATA 2.x device
ada1: Serial Number WD-WMASY0856299
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 610480MB (1250263728 512 byte sectors)
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <WDC WDS500G2B0A-00SM50 X61130WD> ACS-4 ATA SATA 3.x device
ada2: Serial Number 1811AD803646
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
GEOM_ELI: Device ada2p4.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: accelerated software
uhub1: 8 ports with 8 removable, self powered
uhub0: 14 ports with 14 removable, self powered
ugen1.2: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 1> on usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x275d USB OPTICAL MOUSE> at usbus0
ugen0.4: <MSI MYSTIC LIGHT> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
VT: Replacing driver "efifb" with new "dummy".
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC570 0xEF).
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
ATOM BIOS: 113-57045EHB2-W90
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Successfully added WC MTRR for [0xd0000000-0xdfffffff]: 0;
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16730076 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 588000
[drm] DM_PPLIB: 952000
[drm] DM_PPLIB: 1076000
[drm] DM_PPLIB: 1143000
[drm] DM_PPLIB: 1208000
[drm] DM_PPLIB: 1250000
[drm] DM_PPLIB: 1286000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 128600
[drm] DM_PPLIB: memory_max_clock: 175000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.48!
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-2
[drm] - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-3
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-D-1
[drm] - kern.vt.fb.default_mode
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0830000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "dummy" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xd0830000 vbase=0xfffff800d0830000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.35.0 20150101 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub1
uhid0: <Corsair CORSAIR K70 RGB MK.2 Mechanical Gaming Keyboard, class 0/0, rev 2.00/3.24, addr 1> on usbus1
uhid1 on uhub0
uhid1: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 3> on usbus0
ums0 on uhub0
ums0: <vendor 0x275d USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)